MarktPlaza

DJI SPREADING WINGS S1000+ WITH ZENMUSE Z15-A7 GIMBAL (A2)

1410x bekeken
3 jaar geleden geplaatst

Kenmerken

Conditie
Nieuw
Levering
Niet van toepassing

Omschrijving

Product Highlights

• Zenmuse Z15-A7 Gimbal for Sony a7S / a7R
• Gimbal Provides 360° Camera Rotation
• Collapsible Frame and Folding Props
• Up to 24 Pound Total Take-Off Weight
• Low Gimbal Mounting with Dampening
• Retractable Landing Gear
• DJI A2 Flight Control System
• Supports Futaba FASST / DJI DESST Radios
• Up 15 Minutes Flying at 15,000mAh
• Compatible with iPad Ground Station

DJI Spreading Wings S1000+ Professional Octocopter
Performance
Takeoff Weight
13.2 lb / 6 kg to 24.2 lb / 11 kg
Motor
Stator Size
1.6 x 0.6" / 41 x 14 mm
Motor Velocity Constant
KV: 400 rpm/V
Maximum Power
500 W
Weight
With Cooling Fan: 5.6 oz / 158 g
Electronic Speed Control (ESC)
Working Current
40 A
Working Voltage
6S LiPo
Signal Frequency
30 to 450 Hz
Drive PWM Frequency
8 kHz
Weight
1.2 oz / 35 g
Propellers
Size
15 x 5" / 38.1 x 12.7 cm
Weight
0.5 oz / 13 g
Frame
Diagonal Wheelbase
41.1" / 1045 mm
Frame Arm Length
15.2" / 386 mm
Center Frame Diameter
13.3" / 337 mm
Center Frame Weight
With Landing Gear Mounting Base, Servos: 3.3 lb / 1.5 kg
Landing Gear Size
18.1 x 20.1 x 12" / 460 x 511 x 305 mm
Flight Control System
Compatibility
A2 or WooKong-M
Gain Value Settings
For A2 Flight Controller
Basic: Roll 120%, Pitch 120%, Yaw 120%
Attitude: Roll 170%, Pitch 170%, Vertical 120%

For WooKong-M Flight Controller
Basic: Roll 130%, Pitch 130%, Yaw 120%
Attitude: Roll 180%, Pitch 180%, Vertical 120%
General
Power Requirements
Lithium-Polymer (LiPo):
Power Consumption
Maximum: 4000 W
Hovering: 1500 W at 20.9 lb / 9.5 kg takeoff weight
Operating Temperature
14 to 104°F / -10 to 40°C
Weight
9.7 lb / 4.4 kg
Packaging Info
Box Dimensions (LxWxH)
20.1 x 17.8 x 11.6"
DJI A2 Flight Control System for Multi-Rotor Aircraft
Supported ESC Output
400 Hz refresh frequency
Supported Transmitters
With Built-in Receiver: Futaba FASST series and DJI DESST series
Supported External Receivers
Futaba S-Bus, S-Bus2, DSM2
Other DJI Products Supported
Z15, H3-2D, iOSD, 2.4G Bluetooth Data Link, and S800 EVO
Hovering Accuracy (GPS Mode)
Vertical: ±1.6' / 0.5 m
Horizontal: ±4.9' / 1.5 m
Maximum Wind Resistance
< 26.2 fps (8 m/s) / 17.9 mph (28.8 km/h)
Maximum Yaw Angular Velocity
150 deg/s
Maximum Tilt Angle
35°
Ascent/Descent
±19.7 fps / 6 m/s
Power Requirements
Maximum: 5 W
Typical: 0.3 A at 12.5 V
System Requirements
Assistant Software: Windows 8, 7, or XP SP3 -- 32 or 64-bit
Operating Temperature
23 to 140°F / -5 to 60°C
Dimensions
Flight Controller: 2.1 x 1.5 x 0.6" / 54 x 39 x 14.9 mm
IMU: 1.6 x 1.2 x 1" / 41.3 x 30.5 x 26.3 mm
GPS-Compass Pro: 2.4" (diameter) x 0.6" / 62 mm (diameter) x 14.3 mm
LED-BTU-I: 1.2 x 1.2 x 0.3" / 30 x 30 x 7.9 mm
PMU: 39.5mm x 27.6mm x 9.8mm
Weight
Overall: 7.9 oz / 224 g
Packaging Info
Box Dimensions (LxWxH)
6.9 x 4.7 x 2.7"
DJI Zenmuse Z15-A7 3-Axis Gimbal for Sony a7S / a7R
Peripheral
Supported Camera
Sony a7S / a7R
Supported Lens
Sony FE 35mm f/2.8 ZA
Control Requirements
At least 4 spare receiver channels
S-Bus/PPM receiver supported
Software Requirements
For Assistant Software: Windows 8, 7, XP SP3 -- 32 or 64-bit
Electrical Characteristics
Working Current
Static Current: 200 mA at 25 V
Dynamic Current: 400 mA at 25 V
Locked-Rotor Current: 4 A at 25 V
GCU BEC Output
10 A at 12 V
Transmit Power
GCU Wireless Video Transmission: 1 A at 12 V
Performance
Load Weight (Reference Value)
1.4 lb / (622 g) with Sony a7S, FE 35mm f/2.8 ZA lens, battery, lens hood, and SD Card 
1.3 lb (580 g) with Sony a7SR, FE 35 mm f2.8 ZA lens, battery, lens hood, and SD Card
Controlled Angle Accuracy
±0.01°
Maximum Controlled Rotation Speed
Pan Axis: ±130°/s 
Tilt Axis: ±130°/s
Roll Axis ±30°/s
Controlled Rotation Range
Pan Axis Control: ±360° continuous rotation
Tilt Axis Control: +50°:/-140° 
Roll Axis Control: ±40°
General
Power Requirements
GCU: 4S to 12 S LiPo (6S if using S800, S1000+)
Operating Temperature
14 to 122°F (-10 to 50°C)
Dimensions
Gimbal: 8.7 x 8.7 x 7.5" (220 x 220 x 190 mm)
Camera Frame Dimensions: 5.6 x 3" (142 x 76 mm)
GCU: 2.5 x 1.4 x 0.8" (64.2 x 34.1 x 19.5 mm)
Weight
Gimbal: 2.9 lb (1.3 kg)
GCU: 2.2 oz (63 g)
Packaging Info
Box Dimensions (LxWxH)
10.0 x 9.449 x 9.37"

WWW.ZULFAHMILUBIS.COM, We specialize in exporting brand new Drones to any country of the world. We supply best of quality drones including major models from best brand makers. Currently we offer best products and brands from DJI Drones and Xfoldrig Drones. Please visit our site or contact us to check our product availability. World Wide Shipping Service Available! For more information regarding the product, you can visit our official website. You can also looking for the other simillar product and you can place your order directly from our official website, WWW.ZULFAHMILUBIS.COM

Store Website : https://www.zulfahmilubis.com