Anycubic Kobra Neo 3D Printer, Auto Leveling, Max 100mm/s Printing Speed, Resume Printing, 2.4 inch LCD Screen, PEI-coated Metal Sheet, 220*220*250mm
Afhalen is niet mogelijk.
Overzicht van alle producten vind je op eu9.nl
Bij categorie, alle merken met de kortingen.
Alle producten zijn nieuw, en het heeft ook geen zin om erop te bieden, je kan wel even checken
wat de prijs is op dit moment.
Je kan alleen online bestellen, stuur even een bericht om de link aan te vragen.
Alle aangeboden producten komen uit Warehouses die zich in EU landen bevinden, dus er zijn geen invoerkosten.
Geschatte levertijd is anders per warehouse [Land] reken op 3 - 10 werkdagen.
De aangeven prijzen kunnen afwijken omdat het om aanbiedingen gaat, maar dat wordt al vermeld zodra u de link van ons krijgt wat de prijs is.
Betalen kan met Ideal, Paypal, Klarna en alle andere kaarten.
Verzendkosten vanaf gratis tot .... dat is ook per item verschillend.
Highlights
Anycubic Kobra Neo 3D Printer - The Best for Beginners
The Kobra Neo 3D printer is a game changer. It has an easy-to-feed direct drive and a super simple auto bed leveling probe that removes much of the frustrations new makers face. The PEI-coated steel flex plate is a joy to use, grabbing prints tight while hot and completely releasing them when cold. For this reason, the Kobra Neo is considered the Best 3D Printer for Beginners in 2023.
The Anycubic Kobra Neo 3D printer comes with everything you need to get started: tools to build and maintain the printer, side cutters, nozzle cleaner, grease, and a microSD card with a USB adapter. You also get a spare nozzle and a small sample of PLA.
The Kobra Neo arrives 90% pre-assembled and only needs a few bolts to put together. It can be assembled in about 20 minutes. The wiring is clearly marked and easy to plug into place.
The Anycubic Kobra Neo comes with an inductive automatic bed leveling sensor, which uses a non-contact magnetic probe. This is the same leveling sensor on the standard Kobra and Kobra Go, which detects the metal surface of the build plate while hovering a few millimeters above it. There are no knobs for manual tramming and everything is done through the printer’s touch screen.
To level the bed, select Menu from the home screen. Then select Leveling →Auto Leveling and the printer takes care of the rest. It will home the bed, heat up, then double tap 25 spots in a grid across the bed surface. The sensor hovers a few millimeters above the bed, not allowing the nozzle to touch during the process.
It’s important to note the auto leveling can only tell where the sensor is located, not the nozzle itself. The next step is to set the Z height, which places the nozzle at the perfect distance from the bed. See our handy guide on bed leveling to get an idea of how close you should get.
The Anycubic Kobra NEO has a direct drive tool head – meaning that the extruder gears, fans, and hotend are all in one small package. This makes filament loading a lot easier for beginners with everything in front of the machine.
To load filament, press Menu on the home screen, then Prepare, and finally Preheat PLA (or Preheat ABS for a higher setting). Place the filament in the hole at the top of the drive and once it is hot it will grab on. Press stop when the filament begins to flow from the nozzle. You WILL need to be on standby to press stop, it will not stop on its own.
Removing the filament works the same, just in reverse. Let the tool head preheat, select Filament Unload and let the gears back the filament out. Remove the filament when there is no more tension on the plastic.
The Anycubic Kobra Neo is only slightly different in design from the original Kobra and nearly identical to the Kobra Go. It has a modern look with an etched black aluminum alloy gantry and sturdy plastic parts embossed with futuristic-looking patterns. The hotel cover is smaller and looks a bit more like the 2021 Vyper – our pick for the best printer for a print farm.
Intelligent Auto Leveling 3D Printer
Anycubic Kobra Neo is equipped with the self-developed Anycubic LeviQ automatic leveling function. 25-point intelligent and precise calibration and hardware algorithm to automatically compensate for the unevenness of the hotbed, leveling has never been so easy.
Integrated Extruder for Precise Filament Extrusion
The extruder is integrated within the hot end, making it easier to replace the filament with a lower failure rate. Moreover, an integrated extruder can deliver the filament more efficiently and precisely.
High Printing Speed & Large Printing Size
Anycubic Kobra Neo prints at a typical speed of 60mm/s and reaches 100mm/s at its highest, which is possible to speed up 3D printing times without losing quality. Compared to the previous generation Anycubic Mega S, The Anycubic Kobra Neo has a 34.4% increase in printing volume to 12.1 liters. The printing size is 220*220*250 mm, which is equivalent to the size of a standard size 5 football.
Adhesive PEI Spring Steel Platform for Easy Removal
The printing platform is made of magnetic spring steel, which is wear-resistant, less breakable, and bendable. The finished miniatures can be removed quickly by bending the build platform slightly. The magnetic design makes it easy to install and remove.
10 Minutes Easy Set-Up
The 5-modular design makes it possible to set up the printer within 10 minutes, which makes Kobra Neo a good choice for a beginner-friendly FDM 3D printer.
Knobs for Easy Adjustment
The knobs of the XY axis belt-tensioner make it easy to adjust the string tightness. No additional tools are required, just with your hands.
More Choices of Filaments
Compatible with popular 3D printing filaments such as PLA, ABS, PETG, and TPU, which are easy to print and ideal for beginners.
Resuming Printing & Filament Run-out Sensor
The standard power outage resuming sensor and the optional filament run-out sensor reduce filament waste and save time by avoiding the printing failure caused by the power outage and lack of filament.
Specification
General Brand: Anycubic
Type: 3D Printer
Model: Kobra Neo
Color: Black
Specification Technology: FDM
Build Volume: 220*220*250mm
Leveling: Anycubic LeviQ, 25-point automatic leveling
Printing speed: ≤100 mm/s (Max speed)
X/Y/Z Positioning Accuracy: 0.0125/0.0125/0.00125mm
Layer Thickness: 0.05 - 0.3 mm
Nozzle temperature: ≤500 Fahrenheit / 260 Celsius
Hot bed temperature: ≤230 Fahrenheit / 110 Celsius
Extruder: Direct Drive
Filament run-out detection: optional
Resume printing: yes
Printing Platform: Double-sided PEI-coated Metal Steet
Z-Axis: Single Thread Rod
Control: 2.4" LCD Screen & Control Knob
Printing material: PLA / ABS / PETG & TPU
Nozzle size: 0.4 mm (replaceable)
Weight & Size Product Weight: 7.4kg
Package Weight: 9kg
Product Size(L x W x H): 49x44.5x44.3cm
Package Size(L x W x H): 44.5x44.3x49cm
Package Contents
1 x Base
1 x Nozzle
1 x Display screen
1 x Filament
1 x Filament holder
1 x Screws
1 x Frame
1 x X-axis limit switch kit
1 x Print head
1 x Spring washer
1 x SD card
1 x SD card reader
1 x Power cord
1 x User-manual
Retourneren
GeekBuying adviseert oprecht elke gerespecteerde klant om de volgende voorschriften zorgvuldig te lezen alvorens te kopen:
